¿Qué es una máquina automática de bloqueo de tornillos??
En el mundo de la industria existen procesos básicos cercanos que intervienen por completo en la creación de un producto final. Normalmente, se comete el error de invertir en la parte central de la empresa, that part of production that is responsible for the most important, and the basic processes are forgotten. This is done by the lack of information from the entrepreneur, who does not handle the active data to verify that any acceleration of these processes will influence the final result of the product as well.
One of the processes that are not taken into account is the screwing of bases or parts in a product. Most of the work can be done manually by experts in the field, who will work on a pre-established schedule and will continue to perform their work at a certain speed. But the difference in updating this task by means of an automatic screw locking machine can be seen immediately.
Un máquina automática de bloqueo de tornillos is as the name implies, a machine designed to collect previously prepared screws, and by means of a program given by an operator, screw those screws in the exact places where they are programmed to do so. It also uses the appropriate and dictated pressure to do so.
máquina de bloqueo de tornillo automático de mano
La máquina automática de bloqueo de tornillos bloquea y recoge los tornillos con fuerza y suavemente de su dispositivo electrónico, como una calculadora, teléfono móvil, ordenador portátil, etc. La máquina es fácil de usar con bloqueo automático y poder de recogida de los tornillos.. La máquina es una máquina rápida y que ahorra tiempo para uso industrial..
This screwing process, when performed by a machine, ends up being extremely fast (10 times faster than normal time) and at the same time, the margin of error in screwing is reduced to only 0.01%. With this, we end up having high quality products, simply and quickly, which also greatly reduces the cost of production.
How does an automatic screw locking machine work?
The truth this machine may seem complicated but it is much simpler than it seems. First, the bases with the products to be screwed must be placed, then, by means of a scanner, the machine must be programmed to mark exactly where the holes should be made. Then the screw pressure and speed are programmed.
Ahora, the operator must manually place the base in place with the corresponding part. The machine will start its operation in a simple way: Move your tip to the screw dispenser, take advantage of it is magnetized which will attract the screw, then go to the piece, and perform the screwing in the right place and with the pressure scheduled.
The machine will repeat the process until the whole piece has been screwed, at that time, the piece must be manually removed and the next one placed. In this way the machine will keep performing the operation for which it was programmed, until the entire order is finished.
What improvements brings the automatic screwing done by the automatic screw locking machine?
First of all, the working time is greatly reduced and at the same time efficient work is maintained by also reducing the preparation time between pieces. Less time in screwing means more production of daily products.
Following this, the staff is greatly reduced, returning to this machine a valuable asset which will pay itself in just half a year. Less employees means less wages to pay.
Finally, the margins of errors are almost nil. Something that ends up producing higher quality, faster.
máquina automática de bloqueo de tornillos
Para más sobre máquina automática de bloqueo de tornillos,puede hacer una visita a techleader en https://www.automatedfl.com
