중국은 다양한 유형의 기기 대량 생산의 선두 주자로 간주되는 국가입니다.. 대량 생산을 통해 강력하고 안정적인 경제를 유지할 수 있습니다., 따라서, 생산은 중단없이 지속적으로 이루어집니다.. 하나, 중국 이외의 많은 회사, 대량 생산을 추구하지만 이 나라와 같은 효과로 그렇게 하지 마십시오..
채용 인원의 차이가 아닙니다., 달성한 연구도. 중국, 항상 최전선에 진입하려고 합니다., and for this it seeks to obtain the most advanced machinery to be able to produce quickly and effectively.
Seeing this, we understand why a simple procedure that is normally delegated to humans can be accelerated in a gigantic way using the appropriate machinery.
자동 스크류 구동기
The use of 자동 스크류 피더 기계 allows the screws to be ready to be placed without delay. In addition, these machines in addition to ordering them, perform the counting of the pieces to minimize their waste, something that does not happen with the human factor.
자동 스크류 피더 기계 자동화 분야의 나사 및 나사 공급을 목적으로 제작된 조립 장비입니다., 부품 조립, 전자 회로 기판, 기계, 스마트 폰, 전기 무선 전화, 컴퓨터, 탐색 화면, 사운드 박스, 카메라, 작은 장치, toys … The machine has the function of quickly and accurately aligning screws. The machine can be used to classify and supply screws for assembly for different types of screw heads …and so on.
반면에, 그만큼 자동 나사 잠금 기계 works tirelessly and with a fixed working time. With just placing the pieces to be screwed in the base, the machine will perform the work for which it was programmed, with only one possibility of 1 per thousand error. This translates into rapid production, which with the right staff can multiply the dispatch speed of this area by 1000%.
How these two machines translate to profitable production
그만큼 자동 스크류 피더 기계 is a machine that simply seeks to accelerate the screwing process and at the same time make a count of the parts that enter the production chain. It is not a machine with a very complex job, since it is based on a device where all the screws are placed and through its operation it seeks to align and dispatch them to be screwed. The way in which this machine increases profitability is obviously by the reduction of personnel for the classification of the screws, and by increasing the speed for screwing enormously, something that is vitally important when it comes to continuous mass production.
Following this we have the 자동 나사 잠금 기계. This machine works in a slightly more elaborate way: it needs a special programming to signal where the screwing will take place, the force and pressure to be placed on each screw must also be adjusted. This machine collaborates with profitability in a much more active way:
a- It greatly reduces the personnel destined to screw. It will only take personnel to place the pieces to be screwed and remove them once finished, the machine will do the rest.
b- The margin of error when screwing is 0.01%. That said, it is very unlikely that there will be damage to delicate components or that they are screwed out of the preset place. This translates into more mass-produced components with superior quality.
c- The screwing speed is about 10 times higher than the manual and at the same time the same amount of rest is not needed. This allows the machine to work for long periods.
이것으로, it is clearly seen as a process considered basic, can greatly increase profitability for the company.
에 대해 더 알아보기 자동 스크류 피더 기계,당신은 방문을 지불 할 수 있습니다 https://www.automatedfl.com
