Automatic screw locking machine is an imitation of manual screwing equipment which can achieve semi-automatic loading and fully automatic pick-up and locking screw operation. Det er hurtigere end manuel betjening og flere gange hurtigere end manuel betjening, så det vil være mere fordelagtigt at skrue.
1. Nu er en æra med effektivitet, virksomheder kan kun gennemføre en rimelig forøgelse af effektiviteten for at reducere omkostningerne, skruning krævede tidligere et stort antal arbejdsomkostninger, and the use of automatic screw locking machine equipment can be a good solution to this problem. An automatic screw locking machine can effectively replace the 2-3 operators and can do for the enterprise to control costs.
2. The automatisk skruestramningsmaskine has higher locking accuracy. Manual lock pay operation sometimes because of workers operating electric screwdriver proficiency is not the same resulting in the final lock pay quality will appear great deviation. If the use of automatic locking screw machine equipment to operate this situation can be very good to avoid, automatic locking screw machine using coordinate type positioning operation, once the parameters are set up, basically can ensure the lock accuracy of the product.
3. The automatisk skruelåsning maskine can better control the quality and achieve unified management. Each batch of products produced by screw machine equipment is basically the same, the more there is not too much deviation in quality. Enterprises can also improve production capacity and quality to a certain extent after purchasing equipment. It can also maximize productivity.
4. Automatic screw products will not be secondary pollution. In the automatic screw locking machine, the machine does almost all the work. Mainly including screw feeding, screening, locking screws and other work, and manual operation only feeding and auxiliary detection. Derfor, the products produced are completely free of direct human interference, and screw products are completely free of secondary pollution.
Now automatisk skruefastgørelsesmaskine has been widely used in the electronic industry automatic assembly line and auto screw automatic assembly industry as long as the use of screws in the field can use automatic screw locking machine for screw assembly, to replace the manual screw locking operation. Automatic locking screw equipment according to the scheme type, the equipment is more diversified. Non-standard automation equipment can be customized according to customer requirements, design of its sort is more, common are: bring about mechanical arm lock screw machine, portable lock screw machine, horizontal lock pay plan, dual system lock, lock back-to-back pay for gantry structure, as well as drilling, glue, automatically send nuts, automatically send artifacts, etc. This not only reduces labor costs but also improves production efficiency. Derfor, the use of a can save manpower, and improve the production line of automatic locking screw machine is the inevitable choice of small and medium-sized enterprises in the future.
Classification of screw locking machines：
Hand-held automatic screw locking machine – release one hand out, hold the electric batch with one hand, lockfast, feed fast. There is no need to draw screws back and forth in the production process, as long as the hole can be aligned. Hand-held screw machine is generally in order to deal with the product quantity is less, more kinds of manufacturers can be applied to different kinds of products for screw lock pay. Generally, the speed can reach 2 seconds per particle, and the specific speed depends on the proficiency level of employees.
Desktop double Y-axis automatic screw locking machine – PLC system control, double Y-axis alternate operation, the machine can work non-stop and save 3-4 people in labor. It has some differences from the three-axis screw machine, it can put the product on one side and lock and pay on the other side when one side is locked and immediately proceed to lock the other product.
Flerakset automatisk skruelåsemaskine — 2-20 shafts (manufacturers can customize the number of shafts according to the number of screws), 2-20 electric batches at the same time, complete the multi-screw locking payment. Save labor 5-10 people when a product is locked immediately after the next product, almost always in a few seconds to complete a product lock payment.
Servo automatic screw locking machine – torque control, real-time data display, fast lock speed. Save 3-5 people, it is generally used for high precision products. The general price is higher, but its configuration also is higher than the general screw machine, the quality that the lock pays is better, product defect rate is extremely low.
Efter at have sammenlignet fordele og ulemper ved multi-funktionen skrue tilspændingsmaskine, vi kan konstatere, at dets fordele opvejer ulemperne. Så længe producentens kvalitet består testen, som serviceudbyder med fokus på skruefastgørelsesindustrien, vi insisterer på at tage kvalitet som grundlag gennem vores egen kontinuerlige indsats. , kunder er formålet, teknologi er drivkraften, og win-win er målet. Kombinerer sine egne fordele og mange års brancheerfaring, det har udviklet en række produkter i branchen. Det løser produktionseffektiviteten og produktkvalifikationsgraden for virksomhedskunder, erstatter meget arbejdskraft, forbedrer produktkvaliteten, produktionskapacitet, reducerer produktions- og arbejdsomkostninger, og i høj grad forbedrer kundens virksomhedsimage.
