Kina er et land, der betragtes som førende inden for masseproduktion af forskellige typer enheder. Masseproduktion giver dig mulighed for at opretholde en stærk og stabil økonomi, derfor, produktionen er kontinuerlig og uden stop. Imidlertid, mange af virksomhederne uden for Kina, søge at producere masse, men gør det ikke med samme effektivitet som dette land.
Forskellen handler ikke om det ansatte personale, heller ikke de opnåede undersøgelser. Kina, søger altid at gå i front, and for this it seeks to obtain the most advanced machinery to be able to produce quickly and effectively.
Seeing this, we understand why a simple procedure that is normally delegated to humans can be accelerated in a gigantic way using the appropriate machinery.
automatisk skruemaskine
The use of automatisk skruefødermaskine allows the screws to be ready to be placed without delay. In addition, these machines in addition to ordering them, perform the counting of the pieces to minimize their waste, something that does not happen with the human factor.
Automatisk skruefødermaskine is an assembly equipment manufactured for the task of supplying screws and screws in the field of automation, samling af komponenter, elektroniske printkort, maskineri, smartphones, el Trådløse telefoner, computere, navigationsskærme, lydbokse, kameraer, små enheder, toys … The machine has the function of quickly and accurately aligning screws. The machine can be used to classify and supply screws for assembly for different types of screw heads …and so on.
On the other hand, the automatisk skruelåsning maskine works tirelessly and with a fixed working time. With just placing the pieces to be screwed in the base, the machine will perform the work for which it was programmed, with only one possibility of 1 per thousand error. This translates into rapid production, which with the right staff can multiply the dispatch speed of this area by 1000%.
How these two machines translate to profitable production
The automatisk skruefødermaskine is a machine that simply seeks to accelerate the screwing process and at the same time make a count of the parts that enter the production chain. It is not a machine with a very complex job, since it is based on a device where all the screws are placed and through its operation it seeks to align and dispatch them to be screwed. The way in which this machine increases profitability is obviously by the reduction of personnel for the classification of the screws, and by increasing the speed for screwing enormously, something that is vitally important when it comes to continuous mass production.
Following this we have the automatisk skruelåsning maskine. This machine works in a slightly more elaborate way: it needs a special programming to signal where the screwing will take place, the force and pressure to be placed on each screw must also be adjusted. This machine collaborates with profitability in a much more active way:
a- It greatly reduces the personnel destined to screw. It will only take personnel to place the pieces to be screwed and remove them once finished, the machine will do the rest.
b- The margin of error when screwing is 0.01%. That said, it is very unlikely that there will be damage to delicate components or that they are screwed out of the preset place. This translates into more mass-produced components with superior quality.
c- The screwing speed is about 10 times higher than the manual and at the same time the same amount of rest is not needed. This allows the machine to work for long periods.
With this, it is clearly seen as a process considered basic, can greatly increase profitability for the company.
For more about automatisk skruefødermaskine,you can pay a visit to https://www.automatedfl.com
