그만큼 자동 나사 잠금 기계 locks and picks the screws tightly and gently of your electronic device, 계산기처럼, 휴대전화, 노트북, 기타. 기계는 나사에 대한 자동 잠금 및 피킹 전원으로 사용하기 쉽습니다.. 기계는 산업용으로 빠르고 시간을 절약할 수 있는 기계입니다..
The fact of using an 자동 나사 잠금 기계 does not always mean that work is sought with mass production procedures. Obviously you have the advantages of speed by increasing the screwing processes 10 times, and the profitability of these devices for mass production is also taken into account, but in some cases they are sought for more unique procedures: the screwing of delicate products.
자동 나사 잠금 기계
There are products which make it difficult to fix them to bases by means of screws manually. A classic example is motherboards or electronic cards of computerized products.
These cards, are made of a weak material and not very resistant to pressure, in addition to having hundreds of electronic compounds that if perforated equivocally, could end up damaging parts that are quite expensive.
How benefits the use of these machines to the procedures of screwing in delicate materials?
First of all, 그만큼 자동 나사 잠금 기계 has an infallible programming system. By means of this programming, it is sought to indicate to the machine where exactly it will make the holes. After programmed for this, this will perform the procedure with a minimum of failure. In this way the electronic compounds will not be drilled in any way, and the structure of the products will be maintained at their maximum.
이에 이어, weak materials are susceptible to yield under the pressure of a very tightly screwed screw, or to be damaged by the movement of a screw that is not well fixed. To do this, these machines also have a pressure programming system: you can tell the screwdriver how much pressure you should exert on the screw. In this way you will have a strongly fixed piece, but without the possibility of breaking by chance.
Having already touched the precision and pressure, we must talk about the screwed position. When placing a screw, if done with a common screwdriver, there is a possibility that the screw enters into the slightly crooked piece.
This may not seem like something serious at one time, but a screw that is screwed in a twist, does not fit completely and gives the risk that when tightened with little pressure, break the material, or worse, be isolated making it impossible to remove.
그러므로, these machines come with a simple secret: the piece that is responsible for performing the screwing process, is covered with the same clamp that holds it, and in turn, this clamp is flat head. The secret lies in placing the head of the flat clamp on the material and after this start turning the screwed device. With this the 자동 나사 잠금 기계 will place the screw in perfect straight position and there will be no risk of damage.
Speed in delicate processes
드디어, these processes are usually done by experts in the area from which you come from these delicate products. If they are done manually, it can take a long time to screw, 하나, since it is a previously programmed machine, the procedure will not take more than a few minutes. This ensures a clean, safe and fault-free process quickly.
에 대해 더 알아보기 자동 나사 잠금 기계,you can pay a visit to techleader at https://www.automatedfl.com
